Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Tire Pressure Monitor

This vehicle may have a Tire Pressure Monitor System (TPMS).

The low tire pressure warning light alerts to a significant loss in pressure

The low tire pressure warning light alerts to a significant loss in pressure of one of the vehicle's tires. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the Tire and Loading Information label. See Vehicle Load Limits on page 9‑10.

The warning light will remain on until the tire pressure is corrected.

The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This may be an early indicator that the tire pressures are getting low and the tires need to be inflated to the proper pressure.

The TPMS does not replace normal monthly tire maintenance. Maintain the correct tire pressures.

StabiliTrak® Syste
The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system is on when the vehicle is started. • To turn off both Traction Control and Stabili ...

Tire Sealant and Compressor Kit
This vehicle may come with a spare tire and tire changing equipment or a tire sealant and compressor kit. The kit can be used to temporarily seal small punctures in the tread area of the tire. ...

Other materials:

Automatic Transmission Fluid
How to Check Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer and have it repaired as soon as possible. The vehicle is not equipped with a transm ...

Tire Pressure
Tires need the correct amount of air pressure to operate effectively. Notice: Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can result in: • Tire overloading and overheating which could lead to a blowout. • Premature or irregula ...

Backup Lamp Replacement
Preliminary Procedures Remove the rear compartment sill trim plate. Refer to Rear Compartment Sill  Trim Plate Replacement. Disconnect the electrical harness connector from the backup lamp socket. Back Up Lamp Nut (Qty: 4) Caution: Refer to Fastener Caution in the Preface ...

© 2017-2021 Copyright www.crion.site