Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Tire Messages

SERVICE TIRE MONITOR SYSTEM

This message displays if there is a problem with the Tire Pressure Monitor System (TPMS).

TIRE LEARNING ACTIVE

This message displays when the system is learning new tires.

TIRE PRESSURE LOW ADD AIR TO TIRE

On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low.

There is also an icon with the warning that will indicate the location of the low tire.

The low tire pressure warning light will also come on.

If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label.

You can receive more than one tire pressure message at a time. To read the other messages that may have been sent at the same time, press the SET/CLR button. The DIC also shows the tire pressure values.

Starting the Vehicle Messages
TURN STEERING WHEEL START VEHICLE AGAIN This message displays when you try to start the vehicle, but the column remains locked. Try turning the steering wheel while starting the vehicle to unlock t ...

Transmission Messages
SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the transmission ...

Other materials:

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR Disabling ...

Side Blind Zone Alert (SBZA)
The vehicle may have a Side Blind Zone Alert (SBZA) system. Read this entire section before using the system. WARNING SBZA does not detect vehicles rapidly approaching outside of the side blind zones, pedestrians, bicyclists, or animals. Failure to use proper care when changing lanes may res ...

Aluminum Wheel Refinishing
Finish Damage Evaluation Procedure Note: If the wheels are chrome-plated, do not re-plate or refinish the wheels. If the wheels are polished aluminum, do not refinish the wheels in the dealer environment. Utilize a refinisher that meets manufacturer guidelines. Inspect the wheel ...

© 2017-2021 Copyright www.crion.site