Caution: Refer to Fastener Caution in the Preface section.
Tighten 2.5 N·m (22 lb ft)
Rotate the control module with bulbs counterclockwise and remove from the tail lamp housing.
Warning: Refer to Halogen Bulb Warning in the Preface section.
Tail Lamp Bulb Replacement
Remove the rear tail lamp assembly. Refer to Tail Lamp Replacement.
Rotate the bulb socket from the tail lamp housing.
Pull the bulb straight from the lamp harness socket
OnStar Additional Information
Transferring Service Press to request account transfer eligibility information. The Advisor can assist in canceling or removing account information. If OnStar receives information that vehicle ownership has changed, OnStar may send a voice message to the vehicle, requesting updated account i ...
Position the front end upper tie bar (1) on the vehicle. Verify the fit of the front end upper tie bar. Clamp the front end upper tie bar into position. Weld seam accordingly. Weld seam accordingly. Grind down weld seams as needed for related panels and components. ...
Definition of Danger, Warning, Caution, and Note
The diagnosis and repair procedures in a GM Service Manual contain both general and specific Dangers, Warnings, Cautions, Notes or Importants. GM is dedicated to the presentation of service information that helps the technician to diagnose and repair the systems necessary for the proper operat ...