Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Steering Linkage Inner Tie Rod Replacement (Hydraulic Power Steering)

Chevrolet Cruze Repair Manual / Steering / Power Steering / Steering Linkage Inner Tie Rod Replacement (Hydraulic Power Steering)

Special Tools

CH-6247 Removal and Installation Tool for the Steering Linkage Inner Tie Rod

For equivalent regional tools, refer to Special Tools.

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting  and Jacking the Vehicle.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  3. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement.
  4. Remove the steering gear boot. Refer to Steering Gear Boot Replacement

  1. Remove the steering linkage inner tie rod with CH-6247 remover/installer .

Installation Procedure

  1. Apply threadlock compound to the threads of the inner tie rod.

Caution: Refer to Fastener Caution in the Preface section.

  1. Install the steering linkage inner rod using the CH-6247 remover/installer and tighten to 90 N·m (64 lb ft).
  2. Install the steering gear boot. Refer to Steering Gear Boot Replacement.
  3. Install the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement.
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  5. Measure the wheel alignment. Refer to Wheel Alignment Measurement.
  6. Adjust front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment.
  7. Center the steering angle sensor. Refer to Steering Angle Sensor Centering.
Steering Gear Replacement (Hydraulic Power Steering)
Special Tools EN 45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Turn the front wheels to the straight forward position and secure the ...

Steering Linkage Inner Tie Rod Replacement (Electronic Power Steering)
Special Tools CH-6247 Removal and Installation Tool for the Steering Linkage Inner Tie Rod For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and support the vehicle ...

Other materials:

Battery
Refer to the replacement number on the original battery label when a new battery is needed. WARNING Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. ...

Air Conditioning Compressor and Condenser Hose Replacement (1.6L LDE, LXV, and 1.8L 2H0)
Removal Procedure Recover the refrigerant. Refer to Refrigerant Recovery and Recharging Remove front bumper fascia. Refer to Front Bumper Fascia Replacement Remove A/C compressor and condenser hose nut (1) from A/C condenser (2). Remove A/C compressor and condenser hose bol ...

Steering Linkage Inner Tie Rod Replacement (Electronic Power Steering)
Special Tools CH-6247 Removal and Installation Tool for the Steering Linkage Inner Tie Rod For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and support the vehicle. Refer to Lifting  and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to ...

© 2017-2021 Copyright www.crion.site