When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
2. Firmly apply both the parking brake and the regular brake.
Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.
3. For automatic transmission vehicles, try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral). If the vehicle starts in any other position, contact your dealer for service.
For manual transmission vehicles, put the shift lever in Neutral, push the clutch pedal down halfway, and try to start the engine. The vehicle should start only when the clutch pedal is pushed down all the way to the floor. If the vehicle starts when the clutch pedal is not pushed all the way down, contact your dealer for service.
US English/Metric Conversion
Decimal and Metric Equivalents Arrows and Symbols This service manual uses various symbols in order to describe different service operations. Front of Vehicle View Detail View Detail Ambient Air Mixed with Another Gas or Indicate Temperature Chan ...
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A Driver In ...
Power Door Locks Description and Operation
Door Lock System Components The power door lock system consists of the following components: Door lock switch - located in the center of the instrument panel Body control module (BCM) Driver door latch Passenger door latch Left rear door latch Right rear door latch Door Lock System ...