Special Tools
For equivalent regional tools, refer to Special Tools.
License Plate Lamp
To replace the license plate lamp bulb:
1. Remove the two screws from the license plate lamp assembly.
2. Turn and pull the license plate lamp assembly down.
3. Turn the bulb socket counterclockwise and pull straight out of the lamp assembly.
4. Remove the bulb by pulling it straight out of ...
Child Seat Restraint System
Warning: A child in a rear-facing child restraint can be seriously
injured if the right-front passengers air bag inflates. This is because the
back of a rear-facing child restraint would be very close to the inflating air
bag. NEVER use a rear-facing child restraint in this vehicle. If a
forwa ...
Installation Procedure
Create 8 24 mm (5/16 x 15/16 in) slots for MIG-brazing along the edges
of the underbody rear side rail reinforcement as noted from
the original panel.
Clean and prepare the attaching surfaces for
brazing.
Position the underbody rear side rail reinforcement on the ve ...