Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Seat Belt Latch Stop Installation

Chevrolet Cruze Repair Manual / Seatbelts / Seat Belt Latch Stop Installation

Preliminary Procedure

Preliminary Procedure

  1. Locate the hole in the seat belt webbing where the original seat belt stop button was located.
  2. If the original hole in the seat belt webbing is not visible, perform the following:
  1. Ensure the seat belt latch plate is located above the mark or original hole.

Seat Belt Stop Button

Procedure

  1. Work the male half of the stop button through the hole in the webbing or at the marked location.
  2. Align the female half of the stop button with the male half of the stop button.
  3. Snap the two halves together.
  4. Trim off any access of the male half of the stop button flush with the female half of the stop button.

Tip

Ensure the male half of the stop button is facing forward in the vehicle in order to ensure the stop button will not snag customers clothing.

Driver or Passenger Seat Belt Buckle Replacement

Preliminary Procedure

Preliminary Procedure

Remove the front seat. Refer to Driver or Passenger Seat Replacement.

Front Seat Belt Buckle Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

Front Seat Belt Buckle Assembly

Rear Seat Buckle Side Belt Replacement

Preliminary Procedure

Preliminary Procedure

Remove the Rear Seat Cushion. Refer to Rear Seat Cushion Replacement.

  1. Rear Seat Rear Bracket Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

  1. Rear Seat Belt Buckle Assembly

Rear Seat Center Shoulder Belt Replacement

Preliminary Procedure

Preliminary Procedure

Remove the right rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement - Right Side.

  1. Rear Seat Center Shoulder Belt Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

  1. Rear Seat Center Shoulder Belt Assembly

Shoulder Belt Replacement - Rear

Preliminary Procedure

Preliminary Procedure

  1. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement   - Left Side.
  2. Remove the rear window panel trim. Refer to Rear Window Panel Trim Replacement.
  1. Rear Seat Shoulder Belt Anchor Plate Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

  1. Rear Seat Shoulder Belt Retractor Bolt

Tighten 45 N·m (33 lb ft)

  1. Rear Seat Shoulder Belt Assembly

Driver or Passenger Seat Shoulder Belt Guide Adjuster Replacement

Preliminary Procedure

Preliminary Procedure

Remover center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement.

  1. Front Seat Shoulder Belt Guide Adjuster Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

  1. Front Seat Shoulder Belt Guide Adjuster Assembly
Repairs and Inspections Required After a Collision
Warning: Restraint systems can be damaged in a collision. To help avoid injury and ensure that all parts in need of replacement are replaced: Replace any seat belt system that was in use during ...

Seat Belt System Description and Operation
...

Other materials:

Hood Adjustment
Hood Caution: Refer to Fastener Caution in the Preface section. Procedure Loosen the hood hinge reinforcement nuts (Qty: 4). Adjust the hood in order to obtain an even gap on both sides between the hood and the fenders, the headlamps and the front bumper fascia and so that the hood ...

Shock Absorber Disposal
Warning: Gas charged shock absorbers contain high pressure gas. Do not remove the snap ring from inside the top of the tube. If the snap ring is removed, the contents of the shock absorber will come out with extreme force which may result in personal injury. Warning: To prevent personal inju ...

Additional Maintenance and Care
Your vehicle is an important investment and caring for it properly may help to avoid future costly repairs. To maintain vehicle performance, additional maintenance services may be required. It is recommended that your dealer perform these services — their trained dealer technicians know your v ...

© 2017-2021 Copyright www.crion.site