Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Roof Rear Header Panel Replacement (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Roof Rear Header Panel Replacement (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Cut the roof front header panel in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal th ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Disable the SIR System. Refer to SIR Disabling and Enabling. Disconnect the negative battery cable. Re ...

Other materials:

Steering Gear Replacement (Hydraulic Power Steering)
Special Tools EN 45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Turn the front wheels to the straight forward position and secure the steering  wheel from moving. Remove the lower steering intermediate shaft bolt (1). ...

Climate Controls
The heating, cooling, defrosting, and ventilation for the vehicle can be controlled with these systems. Vehicles without Air Conditioning 1. Temperature Control 2. Bi-level Air Mode 3. Floor Air Mode 4. Vent Air Mode 5. Fan Control 6. Driver and Passenger Heated Seats (If Equipped) 7. Re ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to ...

© 2017-2021 Copyright www.crion.site