Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Roof Outer Panel Replacement (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Roof Outer Panel Replacement (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed

Installation Procedure
Prepare all mating surfaces as necessary. Align the front hinge pillar body reinforcement. Create 6 x 20 mm (4/16 x 12/16 in) slots for MIG-brazing in locations where you can not app ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery ...

Other materials:

Removal Procedure
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the rear side door. Refer to ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the rear inner wheelhouse as noted from the original panel. Note: If the location of the original plug weld holes can not be determined, space the plug weld holes every 40 mm (1½ in). Clean and prepare the attaching & ...

Brake Assist
This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickl ...

© 2017-2021 Copyright www.crion.site