Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Roof Front Header Panel Replacement (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Roof Front Header Panel Replacement (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Clean and prepare the attaching surfaces for welding. Apply one-part windshield urethane adhesive as noted from the original panel. Position the roof  panel (1) on the ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

Front Fog Lamp Bezel Replacement
Preliminary Procedure Remove front bumper fascia. Refer to Front B 1. umper Fascia Replacement. Remove front fog lamp. Refer to Front Fog Lamp Replacement. Front Fog Lamp Bezel Screw Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (23 lb in) Fro ...

Steering Linkage Outer Tie Rod Replacement
Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Steering Linkage Tie Rod Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 35 N·m (26 lb ft) Steering Linkage Inner Tie Rod Nut Tighten 60 N·m (44 ...

Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam Changer): Push the turn signal lever away from you and release to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. This indicator light turns on in the instrument cluster when the high-beam headlamps are on. ...

© 2017-2021 Copyright www.crion.site