Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Rocker Outer Panel Sectioning (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Rocker Outer Panel Sectioning (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Create 6 x 20 mm (4/16 x 11/16 in) slots for MIG-brazing along the upper edges of the service panel as noted from the original panel. Clean and prepare the attaching surfaces for brazing ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

Hood Adjustment
Hood Caution: Refer to Fastener Caution in the Preface section. Procedure Loosen the hood hinge reinforcement nuts (Qty: 4). Adjust the hood in order to obtain an even gap on both sides between the hood and the fenders, the headlamps and the front bumper fascia and so that the hood ...

Installation Procedure
Install the following components on the drivetrain and front suspension frame if removed: The radiator support brackets. The stabilizer shaft--Refer to Stabilizer Shaft Replacement. The lower control arms--Refer to Lower Control Arm Replacement. The steering gear--Refer to Steering ...

Air Conditioning Compressor and Condenser Hose Replacement (1.6L LDE, LXV, and 1.8L 2H0)
Removal Procedure Recover the refrigerant. Refer to Refrigerant Recovery and Recharging Remove front bumper fascia. Refer to Front Bumper Fascia Replacement Remove A/C compressor and condenser hose nut (1) from A/C condenser (2). Remove A/C compressor and condenser hose bol ...

© 2017-2021 Copyright www.crion.site