Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Repairs and Inspections Required After a Collision

Chevrolet Cruze Repair Manual / Seatbelts / Repairs and Inspections Required After a Collision

Warning: Restraint systems can be damaged in a collision. To help avoid injury and ensure that all parts in need of replacement are replaced:

Do NOT replace single seat belt system components in vehicles that have been in a collision as described above. Always replace the entire seat belt system with the buckle, guide and retractor assembly, which includes the latch and webbing material.

After a minor collision where no automatic restraint device was deployed, seat belt system replacement may not be necessary, unless some of the parts are torn, worn, or damaged.

Seatbelts
Specifications Seat Belt Schematics ...

Seat Belt Latch Stop Installation
Preliminary Procedure Locate the hole in the seat belt webbing where the original seat belt stop button was located. If the original hole in the seat belt webbing is not visible, perform ...

Other materials:

Installation Procedure
Cut the front compartment front rail in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal thickness at the sectioning joint. Create a 50 mm (2 in) backing plate from the unused porti ...

Service
This vehicle may have the new environmentally friendly refrigerant, R1234yf. This refrigerant has a significantly reduced global warming impact on the environment, compared to the traditional automotive refrigerant, R-134a. All vehicles have a label underhood that identifies the refrigerant us ...

Airbag System
The vehicle has the following airbags: • A frontal airbag for the driver. •  A frontal airbag for the front outboard passenger. • A knee airbag for the driver. • A knee airbag for the front outboard passenger. • A seat-mounted side impact airbag for the driver. • A seat-mounted side impac ...

© 2017-2021 Copyright www.crion.site