Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section.

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

  1. Disable the SIR System. Refer to SIR   Disabling and Enabling.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  3. Remove all related panels and components.
  4. Visually inspect the damage. Repair as much of the damage as possible.
  5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
  6. Locate and mark all factory welds.

  1. Drill all factory welds lower. Note the number and location of welds for installation of the service assembly.

  1. Drill all factory welds upper. Note the number and location of welds for installation of the service assembly.

  1. Remove the damaged body lock pillar inner panel.
Body Lock Pillar Inner Panel Replacement (MAG-Welding)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the service panel as noted    from the original panel. Clean and prepare the attaching surfaces for welding. ...

Other materials:

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR   Disabling and Enabling. Disconnect the negative battery cable. Refer to ...

Installation Procedure
Clean and prepare the attaching surfaces for welding. Position the roof rear header panel (1) on the vehicle. Verify the fit of the panel. Clamp the roof rear header panel into position. Spot weld accordingly as noted   from the original panel. Apply the sealer ...

AM-FM Radio
Control Buttons The buttons used to control the radio are: BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM®, if equipped. MENU/SEL: Turn to navigate the available menus and to search for stations. INFO: Press to display additional information that may be available for ...

© 2017-2021 Copyright www.crion.site