Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section.

Warning: Refer to Collision Sectioning Warning in the Preface section.

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

  1. Disable the SIR System. Refer to SIR  Disabling and Enabling.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  3. Remove all related panels and components.
  4. Visually inspect the damage. Repair as much of the damage as possible.
  5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.

  1. Create cut lines on the front compartment front rail.

Note: Do not damage internal reinforcement of front compartment

Note: Do not damage internal reinforcement of front compartment side rail.

  1. Cut the panel where sectioning is to be performed.

Note: Left side only.

Note: Left side only.

  1. Locate and mark all the necessary factory welds of the front   compartment front rail.
  2. Drill all factory welds. Note the number and location of welds for installation of the service assembly.

  1. Remove the damaged front compartment front rail.
Front Compartment Side Rail Sectioning (Short, MIG-Brazing)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Installation Procedure
Cut the front compartment front rail in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the met ...

Other materials:

Courtesy Transportation Program
To enhance your ownership experience, we and our participating dealers are proud to offer Courtesy Transportation, a customer support program for vehicles with the Bumper-to-Bumper (Base Warranty Coverage period in Canada), extended powertrain, and/or hybrid-specific warranties in both the U.S ...

Configure Menu
The Configuration Menu is used to adjust features and preferences, such as Sound, Radio, Nav (Navigation), Display, or Time Settings. 1. Press the Config screen button on the Home Page. 2. Touch-tap the scroll bar until the desired option displays. Select the desired settings to change. S ...

Engine Compartment Overview
1.4L L4 Engine   1. Engine Air Cleaner/Filter 2. Engine Oil Dipstick. 3. Engine Cooling Fan (Out of View). 4. Engine Oil Fill Cap. 5. Remote Negative (-) Grounding Point. 6. Brake/Clutch Fluid Reservoir. 7. Battery 8. Engine Coolant Surge Tank and Pressure Cap. 9. Remote Positive (+ ...

© 2017-2021 Copyright www.crion.site