Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

  1. Disable the SIR System. Refer to SIR  Disabling and Enabling.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  3. Remove all related panels and components.
  4. Visually inspect the damage. Repair as much of the damage as possible.
  5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.

  1. Locate and mark all the necessary factory welds of the front wheelhouse front panel.
  2. Drill all factory welds.

  1. Drill hidden factory weld where front wheelhouse front panel and front wheelhouse overlap.

  1. Remove the front wheelhouse front panel.
Front Wheelhouse Front Panel Replacement (MIG-Brazing)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Installation Procedure
Create 5 x 18 mm (4/16 x 11/16 in) slots for MIG-Brazing along the edges of the front wheelhouse front panel as noted from the original panel. Create a 5 x 18 mm (4/16 x 11/16 in ...

Other materials:

Roof
Specifications Sunroof Schematics Sunroof Component Views   Sunroof Frame Sunroof Sunshade Sunroof Window Sunroof Window Seal Sunroof Housing Rear Drain Hose Sunroof Housing Drain Gutter Sunroof Frame Bolts Sunroof Window Guide Sunroof Air Deflector Cover Su ...

Automatic Transmission Shift Lock Control Function Check
WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface. 2. Firmly apply the parking brake. Be rea ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Dis ...

© 2017-2021 Copyright www.crion.site