Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb in)
How To Indentify Plastic Parts
Plastic parts can be identified by the SAE code, which is usually found on the rear of the part, and/or by the characteristics of the plastic. Knowing the type of plastic aids in selecting the proper repair materials and in selecting the proper repair procedure. Look for the SAE code s ...
Turn the front wheels to the straight forward position and secure the steering wheel from moving. Remove the 2 lower steering intermediate shaft bolts (1). Remove the steering intermediate shaft from the steering gear. Raise and support the vehicle. Refer to Lifting and Jac ...
Support the radiator and condenser from above using the condenser tabs on each side. Remove the lower steering intermediate shaft bolt (1). Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assemblies. Refer to Tire and Wheel Remov ...