Caution: Refer to Fastener Caution in the Preface section.
Tighten 8 N·m (71 lb in)
Tip: Pull the bulb straight from the lamp harness socket.
Remove rear end upper panel extension (1) from service part. Cut the body side inner panel in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal thickness at the sectioning jo ...
Visual Aiming Preparation Procedure
Important: Some state and local laws specify requirements for headlamp aim. Comply with all of these laws when performing any headlamp aiming operations. Headlamp aim should be checked: When a new headlamp capsule is installed. If service or repairs to the front end area have, or may have, ...
Specifications Headlights/Daytime Running Lights (DRL) Schematics Interior Lights Schematics ...