Caution: Refer to Fastener Caution in the Preface section.
Tip Place the door in the full open position.
Tighten 25 N·m (18 lb ft)
Remove the water deflector.
Tighten 9 N·m (79 lb in)
Cut the front compartment front rail in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal thickness at the sectioning joint. Create a 50 mm (2 in) backing plate from the unused porti ...
Rear Compartment Lid Hinge Torque Rod Replacement
Preliminary Procedure Remove rear compartment lid. Refer to Rear Compartment Lid Replacement. Special Tools BO-125 Torque Rod Lifter For equivalent regional tools, refer to Special Tools. Rear Compartment Lid Hinge Torque Rod - Right Side Tip Only use the special tool to remove and i ...
Adding Equipment to the Airbag-Equipped Vehicle
Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal, may keep the airbag system from working properly. The operation of the airbag system can also be affected by changing or moving any parts of the front seats, safety belts, the airbag ...