Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Rear Seat Back Cushion Cover and Pad Replacement - Left Side

Chevrolet Cruze Repair Manual / Seats / Seat Hardware, Trim, and Upholstery / Rear Seat Back Cushion Cover and Pad Replacement - Left Side

Preliminary Procedure

Preliminary Procedure

Remove rear seat - left side. Refer to Rear Seat Replacement

Rear Seat Back Cushion Cover

Procedure

  1. Remove the staples  from the seat back cover.
  2. Remove seat back cushion cover from Velcro.

Rear Seat Back Cushion Pad

Rear Seat Back Cushion Cover and Pad Replacement - Right Side

Preliminary Procedure

Preliminary Procedure

  1. Remove rear seat back - right side. Refer  to Rear Seat Replacement.
  2. Remove rear seat armrest. Refer to Rear Seat Armrest Replacement.

Rear Seat Back Cushion Cover

Procedure

  1. Remove the staples from the seat back cover.
  2. Remove seat back cushion cover from Velcro.

Rear Seat Back Cushion Pad

Passenger Seat Frame Replacement
Removal Procedure Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion  Cover and Pad Replacement Remove the wire harness (1), if equip ...

Thread Repair
General purpose thread repair kits are available commercially. Warning: Refer to Safety Glasses Warning in the Preface section. Note: Refer to the thread repair kit manufacturer's instructions ...

Other materials:

Installation Procedure
Create 8 x 14 mm (5/16 x 15/16 in) slots for MIG-Brazing along the edges of the drivetrain and front suspension frame front support as noted from the original panel. Clean and prepare the attaching  surfaces for brazing. Position the drivetrain and front suspension frame ...

Mirror Adjustment
Exterior Controls for the outside power mirrors are on the driver door. 1. Turn the selector switch to L (Left) or R (Right) to choose the driver or passenger mirror. 2. Move the control to adjust the mirror. 3. Turn the selector switch to the O position to deselect the mirror. Vehicles w ...

Rear Wheel Bearing and Hub Replacement (Disc Brake)
Special Tools EN 45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and suitably support the vehicle. Refer to Lifting   and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and ...

© 2017-2021 Copyright www.crion.site