Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Rear Compartment Floor Panel Sectioning (MIG-Brazing)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Rear Compartment Floor Panel Sectioning (MIG-Brazing)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Align the rear compartment floor panel. Drill 8 mm (5/16 in) for plug welding along the edges of the rear compartment floor panel as noted from the original panel. Clean and prepare th ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Other materials:

Bluetooth (Infotainment Controls)
For information about how to navigate the menu system using the infotainment controls. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functi ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR Disabling ...

Taillamps, Turn Signal, Sidemarker, Stoplamps, and Back-Up Lamps
Trunk Deck Inboard Taillamps 1. Open the trunk. 2. Remove the trunk deck trim cover (1). 3. Remove the bulb socket (2) by turning counterclockwise and pulling straight out. 4. Remove the bulb from the socket. 5. Install the new bulb in the bulb socket. 6. Install the bulb socket by turni ...

© 2017-2021 Copyright www.crion.site