Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Passenger Seat Frame Replacement

Removal Procedure

  1. Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion  Cover and Pad Replacement

  1. Remove the wire harness (1), if equipped.

  1. Remove front seat back cushion cover (1) and pad (2) from frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Remove   inner seat frame cover (1).
  2. Remove the wire harness, if equipped.

Installation Procedure

  1. Install the wire harness, if equipped.
  2. Install inner seat frame cover (1).

  1. Install front seat back cushion cover (1) and pad (2) to frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Install the wire harness (1), if equipped.

  1. Install front seat cushion cover (1) and pad (2) to frame (3). Refer to Front Seat Cushion Cover and Pad Replacement

Rear Seat Replacement (40 Percent Seat)

Preliminary Procedure

Preliminary Procedure

Rear seat cushion. Refer to Rear Seat Cushion Replacement

  1. Rear Seat Back - Left Side

Procedure

  1. Fold  down rear seat backrest.
  2. Remove rear seat backrest from booth side guide.

Rear Seat Replacement (60 Percent Seat)

Preliminary Procedure

Preliminary Procedure

Remove rear seat belt buckle. Refer to Rear Seat Belt Buckle Replacement

Rear Seat Back - Right Side

Procedure

  1. Fold   down rear seat backrest.
  2. Remove rear seat backrest from booth side guide.

Rear Seat Armrest Replacement

Preliminary Procedure

Preliminary Procedure

Remove rear seat back - right side. Refer to Rear Seat Replacement

  1. Armrest Hinge Cover
  2. Armrest Hinge Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten 4.5 N·m (40 lb in)

  1. Armrest Hinge Bolt

Tighten 9 N·m (80 lb in)

  1. Armrest

Rear Seat Head Restraint Replacement

  1. Rear Seat Head Restraint

Procedure

Push the head restraint guide button and remove the head restraint.

Rear Seat Head Restraint Guide Replacement

Preliminary Procedure

Preliminary Procedure

Remove rear seat head restraint. Refer to Rear Seat Head Restraint Replacement.

  1. Rear Seat Head Restraint Guide Replacement

Procedure

Unclip the rear seat head restraint guide with a suitable device (Qty: 2)

Rear Seat Cushion Cover and Pad Replacement

Preliminary Procedure

Preliminary Procedure

Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement

Rear Seat Cushion Cover

Procedure

  1. Remove the hog rings that secure the rear seat cushion cover to the pad.
  2. Remove seat cushion cover from Velcro.

Rear Seat Cushion Pad

Rear Seat Cushion Replacement

Rear Seat Cushion

Rear Seat Cushion

Procedure

Pull up on the front of the seat cushion to disengage the retainers, and lift out of the vehicle.

Seat Cushion Retainer (Qty: 2)

Rear Seat Back Latch Replacement (40 Percent Seat)

Preliminary Procedure

Preliminary Procedure

  1. Remove rear seat - left side.  Refer to Rear Seat Replacement.
  2. Remove rear seat back cushion cover and pad - left side. Refer to Rear Seat Back Cushion Cover and Pad Replacement - Left Side

Rear Seat Back Latch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

Rear Seat Back Latch

Rear Seat Back Latch Replacement (60 Percent Seat)

Preliminary Procedure

Preliminary Procedure

  1. Remove rear seat - right side. Refer to Rear Seat Replacement.
  2. Remove rear seat armrest. Refer to Rear Seat Armrest Replacement
  3. Remove rear seat back cushion cover and pad - right side. Refer to Rear Seat Back Cushion Cover and Pad Replacement - Right Side

Rear Seat Back Latch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 N·m (33 lb ft)

Rear Seat Back Latch

Driver Seat Frame Replacement
Removal Procedure Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion Cover and Pad Replacement Remove the wire harness (1), if equipped. ...

Rear Seat Back Cushion Cover and Pad Replacement - Left Side
Preliminary Procedure Remove rear seat - left side. Refer to Rear Seat Replacement Rear Seat Back Cushion Cover Procedure Remove the staples  from the seat back cover. Remove seat ba ...

Other materials:

Overheated Engine Protection Operating Mode
This emergency operating mode allows the vehicle to be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternates firing groups of cylinders helps prevent engine damage. In this mode, a significant loss in power and ...

Bluetooth Audio
If equipped, music may be played from a paired Bluetooth device. To play music through a Bluetooth device: 1. Power on the device, pair, and connect the device. 2. Music can be launched by doing one of the following: • Press the Bluetooth Audio screen button on the Home Page. • Press SOURCE or ...

Remote Keyless Entry (RKE) System
The Remote Keyless Entry (RKE) transmitter may work up to 60m (195 ft) away from the vehicle. RKE Transmitter with Remote Start Shown Press the key release button to extend the key blade. The key can be used for the ignition and all locks. Press to unlock the driver door or all doors. P ...

© 2017-2021 Copyright www.crion.site