Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Instrument Panel Fuse Block

The instrument panel fuse block is in the driver side of the instrument panel.

The instrument panel fuse block is in the driver side of the instrument panel. To access the fuses:
1. Open the fuse block cover by pulling out at the top.

2. Remove the lower edge of the cover.

3. Remove the cover.

To reinstall the cover, reverse the steps above.

Instrument Panel Fuse Block

Instrument Panel Fuse Block

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Wheels and Tires

Engine Compartment Fuse Block
To remove the fuse block cover, squeeze the clips and swing it up. Notice: Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical compo ...

Wheels and Tires
...

Other materials:

Variable Effort Steering System Description and Operation
The Variable Effort Steering (VES) system or MAGNASTEER® varies the amount of effort required to steer the vehicle as vehicle speed changes. At low speeds, the system provides minimal steering effort for easy turning and parking maneuvers. Steering effort is increased at higher speeds to provi ...

Instrument Panel Wiring Harness Replacement
Removal Procedure Remove instrument panel compartment assembly. Refer to Instrument   Panel Compartment Replacement. Remove instrument panel wiring harness (2) from instrument panel tie bar (1). Disconnect electrical connectors. Installation Procedure Ins ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove all related panels and ...

© 2017-2021 Copyright www.crion.site