Remove the instrument panel outer trim cover - right side. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 2.5 N·m (22 lb in)
Instrument Panel Molding Replacement
Create 6 x 20 mm (4/16 x 11/16 in) slots for MIG-brazing along the upper edges of the service panel as noted from the original panel. Clean and prepare the attaching surfaces for brazing and spot welding. Position the body lock pillar inner panel on the vehicle. Verify the ...
Lifting and Jacking the Vehicle
Note: The use of a LOW PROFILE LIFT ARMS SYSTEM may be required to avoid unwanted contact with the vehicle's body and structure depending on lifting equipment used. Refer to the manufacture's recommendation for their applications of low profile lift arms system for their lifting equipment. ...
General Plastic Repair
Warning: In order to reduce the risk of personal injury when exposed to toxic fumes while grinding, cutting, or applying repair material on any type of sheet molded compound or RIM rigid plastic, observe the following guidelines: Work in a properly ventilated area Apply protective cream t ...