Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Installation Procedure

Note: If the location of the original plug weld holes can not be

Note: If the location of the original plug weld holes can not be determined, space the plug weld holes every 40 mm (1½ in).

  1. Drill 8 mm (5/16 in) for plug welding along the edges of the rear floor panel filler as noted  from the original panel.
  2. Clean and prepare the attaching surfaces for welding.

  1. Position the rear floor panel filler on the vehicle.
  2. Verify the fit of the rear floor panel filler.
  3. Clamp the rear floor panel filler into position.

  1. Plug weld accordingly.
  2. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
  3. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
  4. Install all related panels and components.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling.
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Rear Floor Panel Filler Replacement (MIG-Brazing)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Other materials:

Rear Bumper Fascia Outer Guide Replacement
Preliminary Procedure Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement. Rear Bumper Fascia Outer Guide Rivet (Qty: 3) Special Tools BO-594-A Hand Rivet Tongs For equivalent regional tools, refer to Special Tools. Rear Bumper Fascia Outer Guide ...

Radio Data System (RDS)
RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can: • Seek to stations broadcasting the selected type of programming. • Receive announcements concerning local and national emergencies. •  Display messages from radio stations. Thi ...

Brake Drum Replacement
Special Tools CH 41013 Rotor Resurfacing Kit CH 42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Warning: Refer to Brake Dust Warning in the Preface section. Check to ensure that the   park brake is fully released R ...

© 2017-2021 Copyright www.crion.site