Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Installation Procedure

  1. Apply structural adhesive on the flanges of the front side door inner panel where the front side door outer panel bears on.
  2. Align the front side door outer panel.
  3. Verify the fit of the front side door outer panel.

  1. Clamp the front side door outer  panel into position.
  2. Pre-flanging the flange with BO-6396 pliers and BO-6392 tool kit .

  1. Continue to hammer in stages along the hem flanges.
  2. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
  3. Install the outside rearview mirror. Refer to Outside Rearview Mirror Replacement.
  4. Install the front side door outside handle. Refer to Front Side Door Outside Handle Replacement.
  5. Install the front side door. Refer to Front Side Door Replacement.
  6. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  8. Enable the SIR system. Refer to SIR Disabling and Enabling.
Removal Procedure
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Re ...

Rear Side Door Outer Panel Replacement (MAG-Welding)
Special Tools BO-6396 Bonding Pliers BO-6392 Flanging Tool Kit For equivalent regional tools, refer to Special Tools. Note: According to different corrosion warranties, only the regional m ...

Other materials:

Horns
Specifications Horn Replacement Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Horn Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 17 N·m (13 lb ft) Horn Tip Disconnect electrical connectors. St ...

Hill and Mountain Roads
Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: • Keep the vehicle serviced and in good shape. •  Check all fluid levels and brakes, tires, cooling system, and transmission. • Shift to a lower g ...

Stabilizer Shaft Replacement
Special Tools CH 904 Underframe CH 49289 Centering Adapter EN 45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Turn the front wheels to the straight forward position and secure the steering   wheel from moving. ...

© 2017-2021 Copyright www.crion.site