Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Installation Procedure

  1. Create 6 x 20 mm (4/16 x 12/16 in) slots for MIG-brazing along the edges of the rear inner wheelhouse as noted from the original panel.

Note: If the location of the original plug weld holes can not be determined, space the slots every 40 mm (1½ in).

  1. Clean and prepare the attaching  surfaces for welding.

  1. Position the rear inner wheelhouse on the vehicle.
  2. Verify the fit of the rear inner wheelhouse.
  3. Clamp the rear inner wheelhouse into position.

  1. Braze accordingly.
  2. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
  3. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
  4. Install all related panels and components.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling.
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Quarter Outer Panel Sectioning (MAG-Welding)
Special Tools BO-6396 Bonding Pliers BO-6392 Flanging Tool Kit For equivalent regional tools, refer to Special Tools Note: According to different corrosion warranties, only the regional ma ...

Other materials:

Global Positioning System (GPS)
The position of the vehicle is determined by using satellite signals, various vehicle signals, and map data. At times, other interference such as the satellite condition, road configuration, condition of the vehicle, and/or other circumstances can affect the navigation system's ability to ...

Fuel Additives
To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to work properly. In most cases, nothing should have to be added to the fuel. However, some gas ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to ...

© 2017-2021 Copyright www.crion.site