Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Installation Procedure

  1. Prepare all mating surfaces as necessary.
  2. Align the body lock pillar outer panel reinforcement.

  1. Create 8 x 24 mm (5/16 x 15/16 in) slots for MIG-brazing upper (1) and lower (2).
  2. Clean and prepare the attaching surfaces for spot welding and brazing.

  1. Position the body lock pillar outer panel reinforcement on the vehicle.
  2. Verify the fit of the body lock pillar outer panel reinforcement
  3. Clamp the body lock pillar outer panel reinforcement into position.

  1. Braze accordingly.

  1. Spot weld accordingly
  2. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
  3. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
  4. Install all related panels and components.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling.
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Body Lock Pillar Inner Panel Replacement (MAG-Welding)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Other materials:

Aluminum Wheel Refinishing
Finish Damage Evaluation Procedure Note: If the wheels are chrome-plated, do not re-plate or refinish the wheels. If the wheels are polished aluminum, do not refinish the wheels in the dealer environment. Utilize a refinisher that meets manufacturer guidelines. Inspect the wheel ...

Front End Upper Tie Bar Support Sectioning (MAG Welding)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. Removal Procedure Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. W ...

Bumpers and Fascias
Specifications Front Bumper Energy Absorber Replacement Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Front Bumper Energy Absorber Procedure Unclip from front bumper fascia. ...

© 2017-2021 Copyright www.crion.site