Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Installation Procedure

  1. Drill 8 mm (5/16 in) for plug welding along the edges of the front wheelhouse panel rear reinforcement as noted from the original panel.

  1. Drill 8 mm (5/16 in) for plug welding where front wheelhouse front panel and front wheelhouse panel rear   reinforcement overlap.
  2. Clean and prepare the attaching surfaces for welding.

  1. Position the front wheelhouse panel rear reinforcement on the vehicle.
  2. Verify the fit of the front wheelhouse panel rear reinforcement.
  3. Clamp the front wheelhouse panel rear reinforcement into position.

  1. Plug weld accordingly.

  1. Plug weld the joint from front wheelhouse panel rear reinforcement to front wheelhouse front panel accordingly.
  2. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti- Corrosion Treatment and Repair.
  3. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
  4. Install all related panels and components.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling.
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Front Wheelhouse Panel Rear Reinforcement Replacement (MIG-Brazing)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Other materials:

Ultrasonic Parking Assist
The Ultrasonic Rear Parking Assist (URPA) system assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph). The sensors on the rear bumper detect objects up to 2.5m (8 ft) behind the vehicle, and at least 20 cm (8 in) off the gr ...

Instrument Panel Outer Air Outlet Duct Replacement
Preliminary Procedure Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Instrument Panel Outer Air Outlet Duct Screw (Qty: 7) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in) Instrument Panel Outer Air Outlet Duct Floo ...

Instrument Panel Lower Trim Pad Cover Replacement
Preliminary Procedure Remove the left outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side. Instrument Panel Lower Trim Pad Cover Screw (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (23 lb in) Instrument Panel ...

© 2017-2021 Copyright www.crion.site