Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Headlining Trim Panel Replacement (Without Sunroof)

Chevrolet Cruze Repair Manual / Body hardware and trim / Floor Coverings and Headlinings / Headlining Trim Panel Replacement (Without Sunroof)

Warning: Do not attempt to repair or alter the head impact

Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.

Caution: If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.

Caution: Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling
  2. Remove the sunshade supports. Refer to Sunshade Support Replacement
  3. Remove the roof console. Refer to Roof Console Replacement
  4. Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement
  5. Remove the assist handles. Refer to Assist Handle Replacement
  6. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement
  7. Remove the center pillar upper garnish moldings. Refer to Center Pillar Upper Garnish Molding Replacement
  8. Remove the quarter window garnish moldings. Refer to Quarter Window Garnish Molding Replacement
  9. Move the front seat fully forward and recline.
  1. Headliner Trim Panel Retainer (Qty: 3)
  2. Headliner Trim Panel Assembly

Procedure

Disconnect the electrical connectors.

Headlining Trim Panel Replacement (With Sunroof)
Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the ...

Instrument Panel and Console Trim
Specifications Instrument Panel Insulator Seal Replacement Preliminary Procedure Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Instrument P ...

Other materials:

If a Tire Goes Flat
It is unusual for a tire to blowout while driving, especially if the tires are maintained properly. If air goes out of a tire, it is much more likely to leak out slowly. But if there ever is a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the flat tir ...

Waterleak Test Preparation
GM vehicles are designed to operate under normal environmental conditions. The design criteria for sealing materials and components takes into consideration the sealing forces required to withstand the natural elements. These specifications cannot take into consideration any artificial ...

SIR Inflator Module Handling and Storage Warning
Warning: When carrying an undeployed inflator module: Do not carry the inflator module by the wires or connector. Make sure the air bag opening points away from you. When storing an undeployed inflator module: Make sure the air bag opening points away from the surface on which the in ...

© 2017-2021 Copyright www.crion.site