Chevrolet Cruze manuals

Chevrolet Cruze Infotainment System: Hands-Free Phone

Using Bluetooth Voice Recognition

To use voice recognition, press the Use the commands below for the various voice features. For additional information, button on the steering wheel.

Use the commands below for the various voice features. For additional information, say “Help” while in a voice recognition menu.

Making a Call

Calls can be made using the following commands.

Dial or Call:

These commands can be used interchangeably to dial a phone number.

Digit Dial:

This command allows a phone number to be dialed by entering the digits one at a time.

Re-dial:

This command dials the last number used on the cell phone.

Using the “Dial” or “Call” Command

To call a number:
1. Press Say a Command,” followed by a tone.. The system responds “Please Say a Command,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing, followed by “Dial.” Once connected, the person called will be heard through the audio speakers.

To call using a name tag: 1. Press Say a Command,” followed by a tone.. The system responds “Please Say a Command,” followed by a tone.

2. Say “Dial” or “Call” and then say the name tag. For example “Call John at Work.” Once connected, the person called will be heard through the audio speakers.

Using the “Digit Dial” Command

This allows a phone number to be dialed by entering the digits one at a time.

1. Press Say a Command,” followed by a tone.. The system responds “Please Say a Command,” followed by a tone.

2. Say “Digit Dial.”
3. Say each digit, one at a time, to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone.

After the last digit has been entered, say “Dial.” If an unwanted number is repeated back, say “Clear” to clear the last number.

Once connected, the person called will be heard through the audio speakers.

Using the “Re-dial” Command

1. Press Say a Command,” followed by a tone.. The system responds “Please Say a Command,” followed by a tone.

2. After the tone, say “Re-dial.” The system dials the last number called from the connected cell phone.

Once connected, the person called will be heard through the audio speakers.

Clearing the System

Unless information is deleted out of the vehicle Bluetooth system, it will be retained. This includes phone pairing information. For directions on how to delete this information, see “Deleting a Paired Phone/ Device.”

Bluetooth
Overview For vehicles equipped with Bluetooth capability, the system can interact with many cell phones and devices, allowing: • Placing and receiving hands-free calls. • Sharing of the cell phon ...

Trademarks and License Agreements
FCC Information See “Radio Frequency Statement” in the owner manual for information regarding Part 15 of the Federal Communications Commission (FCC) rules and with Industry Canada Standards RSS-G ...

Other materials:

Shifting out of Park
This vehicle is equipped with an automatic transmission shift lock control system. The shift lock is designed to: • Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released. • Prevent movement of the shift lever out of P (Park) unless the ig ...

Seat Adjustment
Manual Front Seats To adjust a manual seat: 1. Pull the handle at the front of the seat. 2. Slide the seat to the desired position and release the handle. 3. Try to move the seat back and forth to be sure it is locked in place. Seat Height Adjuster If available, move the lever up or down t ...

Hood Primary Latch Release Cable Replacement
Preliminary Procedure Remove hood primary latch release cable handle. Refer to Hood Primary Latch  Release Cable Handle Replacement. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement Remove the radiator grille support. Refer to Radiator Grille Reinforcem ...

© 2017-2021 Copyright www.crion.site