Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front Wheelhouse Panel Replacement (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Front Wheelhouse Panel Replacement (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Create 5 x 18 mm (4/16 x 11/16 in) slots for MIG-Brazing along the edges of the front wheelhouse front panel as noted from the original panel. Create a 5 x 18 mm (4/16 x 11/16 in ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Other materials:

Engine Oil
To ensure proper engine performance and long life, careful attention must be paid to engine oil. Following these simple, but important steps will help protect your investment: • Always use engine oil approved to the proper specification and of the proper viscosity grade. See “Selecting the Ri ...

Engine Cooling System Messages
A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air condition ...

Installation Procedure
Clean and prepare the attaching surfaces for welding. Apply one-part windshield urethane adhesive as noted from the original panel. Position the roof  panel (1) on the vehicle. Verify the fit of the panel. Clamp the panel into position. Spot weld accor ...

© 2017-2021 Copyright www.crion.site