Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front Wheelhouse Panel Rear Reinforcement Replacement (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Front Wheelhouse Panel Rear Reinforcement Replacement (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Remove the front wheelhouse rear panel brace (1) from service panel. Create 6 x 20 mm (4/16 x 12/16 in) slots for MIG-brazing along the edges of the front wheelhouse (1). Clean a ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Other materials:

Instrument Panel Tie Bar Replacement (Right Hand Drive)
Removal Procedure Remove instrument panel compartment. Refer to Instrument  Panel Compartment Replacement. Remove instrument panel wiring harness (2) from instrument panel tie bar (1). Disconnect electrical connectors. Remove instrument panel tie bar (1). Remov ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the body side outer lower panel as noted from the original panel. Note: If the location of the original plug weld holes can not be determined, space the plug weld holes every 40 mm (1½ in). Clean and prepare the attac ...

Rear Suspension
Specifications Rear Suspension Components Rear Shock Absorber Upper Mount Rear Shock Absorber Upper Mount Rear Shock Absorber Upper Mount Rear Shock Absorber Upper Mount Shock Absorber Assembly Upper Dumping Ring Rear Spring Lower Dumping Ring Rear Axle Bushing Rear Ax ...

© 2017-2021 Copyright www.crion.site