Chevrolet Cruze Repair Manual: Front Lower Control Arm Bushing Replacement
Preliminary Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
- Remove the lower control arm. Refer to Lower Control Arm Replacement.
Lower Control Arm Rear Bushing Bolt
Lower Control Arm Rear Bushing
Caution: Refer to Fastener Caution in the Preface section.
Procedure
- Discard Bushing Bolt and use NEW ONLY.
- Tighten Bushing Bolt with vehicle standing on the ground.
Tighten 55 N·m (41 lb ft) +45-60 degrees
Special Tools
EN-45059 Torque Angle Sensor Kit . Refer to Special Tools.
Installation Procedure
Position the lower control arm (1) in the cradle.
Install and hand tighten the NEW rear lower control arm bushing nuts and
bolts (1).
Install and hand tighten the NEW fro ...
Wheel Stud Replacement
Special Tools
CH-43631 Ball Joint Remover
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and suitably support the vehicle. Refer to Lifting and
Jacking ...
Other materials:
Steering Linkage Outer Tie Rod Replacement
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
Installation.
Steering Linkage Tie Rod Nut
Caution: Refer to Fastener Caution in the Preface section.
Tighten
35 N·m (26 lb ft)
Steering Linkage Inner Tie Rod Nut
Tighten
60 N·m (44 ...
Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam Changer):
Push the turn signal lever away from you and release to turn the high beams on.
To return to low beams, push the lever again or pull it toward you and release.
This indicator light turns on in the instrument cluster when the high-beam headlamps
are on. ...
Hands-Free Phone
Using Bluetooth Voice Recognition
To use voice recognition, press the
button on the steering wheel.
Use the commands below for the various voice features. For additional information,
say “Help” while in a voice recognition menu.
Making a Call
Calls can be made using the following commands.
...