Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front End Upper Tie Bar Support Sectioning (MIG Brazing)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Front End Upper Tie Bar Support Sectioning (MIG Brazing)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Front End Upper Tie Bar Support Sectioning (MAG Welding)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. Removal Procedure Warning: Refer to Approved Equipment for Collision Repair Warning in t ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

Installation Procedure
Cut the front compartment front rail in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal thickness at the sectioning joint. Create a 50 mm (2 in) backing plate from the unused porti ...

Filling the Tank
WARNING Fuel vapors and fuel fires burn violently and can cause injury or death. • To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. • Turn off the engine when refueling. • Keep sparks, flames, and smoking materials away from fuel. • Do no ...

Body Side Trim Panel Replacement - Left Side
Preliminary Procedure Remove the rear side door sill trim plate. Refer to Rear Side Door Sill  Trim Plate Replacement. Remove the rear seat back. Refer to Rear Seat Replacement. Remove the quarter window garnish molding. Refer to Quarter Window Garnish Molding Replacement. ...

© 2017-2021 Copyright www.crion.site