Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front Compartment Upper Side Rail Sectioning (MAG-Welding)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Front Compartment Upper Side Rail Sectioning (MAG-Welding)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Create 5 x 18 mm (4/16 x 11/16 in)   slots for MIG-brazing (1). Clean and prepare the attaching surfaces for spot welding and brazing. Note: In MIG-brazing areas 50 mm (2 in) ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

Headlamp Replacement
Preliminary Procedure Remove the front bumper fascia upper bracket. Refer to Front Bumper Fascia Replacement. Headlamp Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tip Secure the headlamp fasteners in sequence, as indicated. Tighten 2.5 N·m (22 lb in) ...

California Fuel Requirements
If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel is not available in states adopting California Emissions Standards, the vehicle will operate satisf ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the service panel as noted    from the original panel. Clean and prepare the attaching surfaces for welding. Position the body lock pillar inner panel on the vehicle. Verify the fit of the panel. Clamp th ...

© 2017-2022 Copyright www.crion.site