Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front Bumper Fascia Replacement

Chevrolet Cruze Repair Manual / Body repair / Front Bumper Fascia Replacement

Preliminary Procedure

Preliminary Procedure

Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement.

  1. Front Wheelhouse Liner Bolt (Qty: 8) Caution: Refer to Fastener Caution in the Preface section.

    Tighten 2.5 N·m(23 lb in)

  2. Front Bumper Fascia Bolt (Qty: 2) Tighten 9 N·m(80 lb in)
  3. Front Bumper Fascia Retainer (Qty: 4)
  4. Front Bumper Fascia Lower Stiffener Bolt (Qty: 3) Tip Only loosen the bolts.

    Tighten 2.5 N·m (23 lb in)

  5. Front Bumper Fascia

Procedure

  1. Unclip from front bumper fascia guides
  2. Pull forward to remove the front bumper fascia.
  3. Disconnect any electrical connectors.
  4. Transfer parts as needed.
Front Bumper Energy Absorber Bracket Replacement
Preliminary Procedure Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement Drivetrain and Front Suspension Frame Bolt Front Caution: ...

Front Bumper Fascia Guide Replacement
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Front Bumper Fascia Guide Rivet (Qty: 2) Headlamp Bolt Caution: Refer to Fastener Caution ...

Other materials:

Anti-Corrosion Treatment and Repair (Base)
Warning: When applying sound deadeners, or anti-corrosion materials due care and preventative measures must be exercised to prevent any material from being sprayed into door and quarter panel mechanisms such as door locks, window run channels, window regulators and seat belt retractors, as wel ...

Horns
Specifications Horn Replacement Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Horn Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 17 N·m (13 lb ft) Horn Tip Disconnect electrical connectors. St ...

Shifting Into Park
Use this procedure to shift into P (Park): 1. Hold the brake pedal down and set the parking brake. 2. Hold the button on the shift lever and push the lever toward the front of the vehicle into P (Park). 3. Turn the ignition to LOCK/OFF. Leaving the Vehicle with the Engine Running WARNING It ...

© 2017-2021 Copyright www.crion.site