Preliminary Procedure
Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement
Caution: Refer to Fastener Caution in the Preface section.
Tighten 160 N·m (119 lb ft) Note: Do NOT reuse the old bolt.
Tip
For removal only loosen the bolt.
Tighten
22 N·m (17 lb ft)
Note: Secure the drivetrain and front suspension frame with hydraulic jack.
Front Bumper Impact Bar Replacement
The front bumper impact bar is welded on, and must be replaced at the factory welds to retain structure integrity. Refer to Front Bumper Impact Bar Replacement.
Repairs and Inspections Required After a Collision
Warning: Restraint systems can be damaged in a collision. To help
avoid injury and ensure that all parts in need of replacement are
replaced:
Replace any seat belt system that was in use during the
collision serious enough to deploy any automatic restraint device such as
air
bags and ...
Front Fog Lamp Bezel Replacement
Preliminary Procedure
Remove front bumper fascia. Refer to Front B 1. umper Fascia
Replacement.
Remove front fog lamp. Refer to Front Fog Lamp Replacement.
Front Fog Lamp Bezel Screw
Caution: Refer to Fastener Caution in the Preface section.
Tighten
2.5 N·m (23 lb in)
Fro ...
Shifting Into Park
Use this procedure to shift into P (Park):
1. Hold the brake pedal down and set the parking brake.
2. Hold the button on the shift lever and push the lever toward the front of the
vehicle into P (Park).
3. Turn the ignition to LOCK/OFF.
Leaving the Vehicle with the Engine Running
WARNING
It ...