Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Driver Seat Frame Replacement

Removal Procedure

  1. Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion Cover and Pad Replacement

  1. Remove the wire harness (1), if equipped.

  1. Remove front seat back cushion cover (1) and pad (2) from frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Remove  inner seat frame cover (1).
  2. Remove the wire harness, if equipped.

Installation Procedure

  1. Install the wire harness, if equipped.
  2. Install inner seat frame cover (1).

  1. Install front seat back cushion cover (1) and pad (2) to frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Install the wire harness (1), if equipped.

  1. Install front seat cushion cover (1) and pad (2) to frame (3). Refer to Front Seat Cushion Cover and Pad Replacement
Driver or Passenger Seat Recliner Handle Replacement
Recliner Handle Panel Seat Backrest Procedure Use flat blade to removel panel. Recliner Handle Seat Backrest Procedure Use flat blade to remove handle. ...

Passenger Seat Frame Replacement
Removal Procedure Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion  Cover and Pad Replacement Remove the wire harness (1), if equip ...

Other materials:

Information Displays
Driver Information Center (DIC) The DIC displays information about your vehicle. It also displays warning messages if a system problem is detected. DIC Operation and Displays The DIC has different displays which can be accessed by using the DIC buttons on the turn signal lever. The DIC displ ...

Shock Absorber Disposal
Warning: Use the proper eye protection when drilling to prevent metal chips from causing physical injury. Clamp the strut in a vise horizontally with the rod ( 1) completely extended. Drill a hole in the strut at the center of the end cap (3) using a 5 mm (3/16 in) drill bit. Gas o ...

Waterleak Test Preparation
GM vehicles are designed to operate under normal environmental conditions. The design criteria for sealing materials and components takes into consideration the sealing forces required to withstand the natural elements. These specifications cannot take into consideration any artificial ...

© 2017-2021 Copyright www.crion.site