Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Clock

The infotainment system controls are used to access the time and date settings through the menu system. For vehicles with a connective radio or navigation system, see the infotainment manual.

Setting the Time and Date

To set the time and date for the radio with CD: 1. Press CLOCK.

2. Select Set Time or Set Date.

3. Turn the MENU/SEL knob to adjust the highlighted number.

4. Press the MENU/SEL knob to select the next number.

5. To save the settings, press the MENU/SEL button.

To set the time and date for the radio without navigation: 1. Press CLOCK.

2. Select Set Time or Set Date.

3. Turn the MENU/SEL knob to adjust the highlighted number.

4. Press the MENU/SEL knob to select the next number.

5. To save the settings, press OK screen button.

To set the time and date for the radio with navigation: 1. Press CLOCK.

2. Select Set Time or Set Date.

3. Turn the MENU/SEL knob to adjust the highlighted number.

4. Press the MENU/SEL knob to select the next number.

5. To save the settings, press the BACK on the radio faceplate.

Setting the 12/24 Hour Format

To set the 12/24 hour format for the radio with CD: 1. Press CLOCK.

2. Highlight 12/24 Hour Format.

3. Press the MENU/SEL knob to select the 12 hour or 24 hour display format.

4. To save the settings, press the MENU/SEL button.

To set the 12/24 hour format for the radio without navigation: 1. Press CLOCK.

2. Highlight 12/24 Hour Format.

3. Press the MENU/SEL knob to select the 12 hour or 24 hour display format.

4. To save the settings, press OK screen button.

To set the 12/24 hour format for the radio with navigation: 1. Press CLOCK.

2. Highlight 12/24 Hour Format.

3. Press the MENU/SEL knob to select the 12 hour or 24 hour display format.

4. To save the settings, press the BACK on the radio faceplate.

Compass
The vehicle may have a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, ...

Power Outlets
The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. There is one accessory power outlet located on the center floor console and one on the ...

Other materials:

Seat Adjustment
Manual Front Seats To adjust a manual seat: 1. Pull the handle at the front of the seat. 2. Slide the seat to the desired position and release the handle. 3. Try to move the seat back and forth to be sure it is locked in place. Seat Height Adjuster If available, move the lever up or down t ...

Steering Gear Boot Replacement
Special Tools CH-804 Drive Axle Seal Clamp Pliers Removal Procedure Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement. Remove the steering linkage inner tie rod nut (1). Remove the steering gear outer boot clamp (2). Loosen the st ...

Front Suspension Description and Operation
The front suspension has 2 primary purposes: Isolate the driver from irregularities in the road surface. Define the ride and handling characteristics of the vehicle. The front suspension absorbs the impact of the tires travelling over irregular road surfaces and dissipates this energy thr ...

© 2017-2021 Copyright www.crion.site