Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Charging System Light

The charging system light comes on briefly when the ignition is turned on, but

The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working.

The light turns off when the engine is started. If it does not, have the vehicle serviced by your dealer.

If the light stays on, or comes on while driving, there could be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery.

If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.

Passenger Airbag Status Indicator
The vehicle has a passenger sensing system. The instrument panel has a passenger airbag status indicator. United States Canada When the vehicle is started, the passenger airbag status indicato ...

Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions are at acceptable levels, helping to maintain a clean environment ...

Other materials:

Rear Brake Rotor Replacement
Special Tools CH 41013 Rotor Resurfacing Kit CH 42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Warning: Refer to Brake Dust Warning in the Preface section. Remove rear brake caliper bracket. Refer to Rear Brake Caliper Br ...

Installation Procedure
Align the rear compartment floor panel. Drill 8 mm (5/16 in) for plug welding along the edges of the rear compartment floor panel as noted from the original panel. Clean and prepare the attaching surfaces for welding. Position the rear compartment floor panel on the vehicle. V ...

Installation Procedure
Align the rocker inner panel. Drill 8 mm (5/16 in) for plug welding along the edges of the quarter outer panel as noted  from the original panel. Clean and prepare the attaching surfaces for welding. Position the rocker inner panel on the vehicle. Verify the fit of ...

© 2017-2021 Copyright www.crion.site