Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Bumpers and Fascias

Specifications

Front Bumper Energy Absorber Replacement

Front Bumper Energy Absorber Replacement

Preliminary Procedure

Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.

  1. Front Bumper Energy Absorber

Procedure

Unclip from front bumper fascia.

Rear Side Door Weatherstrip Replacement - Body Side
Rear Side Door Weatherstrip - Body Side Procedure Start at the front upper corner of the door opening and pull the weatherstrip away from   the door opening flange. Position th ...

Front Bumper Energy Absorber Bracket Replacement
Preliminary Procedure Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement Drivetrain and Front Suspension Frame Bolt Front Caution: ...

Other materials:

Installation Procedure
Remove all mounds or loose pieces of urethane adhesive from the pinch-weld area. Inspect for any of the following problems in order to help prevent future breakage of the window: High weld Solder spots Hardened sealer Any other obstruction or irregularity in the pinch-weld fla ...

Engine Air Cleaner/Filter
When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the scheduled maintenance intervals and replace it at the first oil change after each 80 000 km (50,000 mi) interval. If you are driving in dusty/dirty conditions, inspect the filter at each engine oil change. How ...

Windshield Washer Pump Seal Replacement
Removal Procedure Open the hood. Remove the windshield washer pump. Refer to Windshield Washer Pump Replacement Using a small flat-bladed tool, remove the washer pump terminal seal (1) from the washer solvent container (2). Installation Procedure Position the washer pump ...

© 2017-2021 Copyright www.crion.site