Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Body Side Outer Panel Reinforcement Replacement (MIG-Brazing)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Body Side Outer Panel Reinforcement Replacement (MIG-Brazing)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Align the body side outer panel reinforcement. Drill 8 mm (5/16 in) for plug welding along the edges of the body side outer panel reinforcement as noted from the original panel. Clea ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

Drive Belt Replacement
Special Tools EN 6349 Locking Pin For equivalent regional tools, refer to Special Tools. Removal Procedure Open the hood. Remove the power steering pump belt. Refer to Power Steering Pump Belt Replacement. Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicl ...

Bluetooth (Overview)
For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: • Placement and receipt of calls in a hands-free mode. • Sharing of the cell phone’s address book or contact list with the vehicle. To minimize driver distraction, before driving, and with ...

Windshield Garnish Molding Replacement
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling. Windshield Garnish Molding Assembly Procedure Loosen  tether clip and steel clips. Disconnect electrical connector. The tether clip at the upper portion of the garnish molding MUST be repla ...

© 2017-2021 Copyright www.crion.site