Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Body Side Outer Lower Panel Replacement (MIG-Brazing)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Body Side Outer Lower Panel Replacement (MIG-Brazing)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the body side outer lower panel as noted from the original panel. Note: If the location of the original plug weld holes can not be ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Other materials:

Navigation System
If the vehicle has a navigation system, there is a separate navigation manual that includes information on the radio, audio players, and navigation system. The navigation system provides detailed maps of most major freeways and roads. After a destination has been set, the system provides turn-b ...

StabiliTrak® OFF Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the TCS is off, the system does not assist i ...

Fog Lamp Aiming
Preparation Procedure Important: Horizontal aim is not adjustable on this vehicle. Vertical aim is done by an adjusting nut located on the rear of the fog lamp. Prior to aiming the fog lamps, perform the following steps: Completely assemble all of the components on the vehicle. Place the ...

© 2017-2021 Copyright www.crion.site